Home / All
Specializing in Decorative Stainless Steel Panels
75 results
ViewShowcase
Stainless cladding with a defined shadow gap, turning the joint itself into the detail instead of hiding it.
Mirror-finish flat facade cladding that lets the elevation take its appearance from sky, light and surroundings.
Flat stainless steel facade panel for elevations where a continuous plane and controlled joints carry the architecture.
Curved stainless steel roofing over long spans, formed to radius so the reflection runs continuously across the surface.
Standing seam stainless roofing for long runs, where a repeated raised joint carries stiffness and sets the scale of the roof.
Stainless steel roofing for long spans, planned around continuous eaves, panel repetition and coordinated fabrication.
Flat, folded or curved 304 stainless roofing sheet with a directional brushed finish, produced to the project panel layout.
PVD coloured stainless steel canopy soffit that lifts the underside of an entrance with a warm reflected tone.
Cantilevered stainless steel canopy that projects from the facade to define the threshold without visible support columns.
Flat stainless steel canopy and portal cladding produced as one coordinated entrance element with clean joints.
Reflective stainless steel roof shell formed to a curved roof, letting surrounding light reveal changes in geometry.
PVD coloured stainless steel roof band that carries a metallic tone across a landmark roof or facade.
Folded stainless steel roof panel with expressed joints, built around the geometry of a landmark roof form.
Etched stainless steel panel for elevator doors and landings, adding a decorative pattern without losing the metal surface.
Mirror stainless steel door and surround panel that extends perceived depth in a compact elevator cabin.
Stainless steel cabin wall panel produced for close-range viewing, with wall, ceiling and feature surfaces coordinated.
Stainless steel wall panel with a fluted relief, giving a large surface directional rhythm and controlled shadow lines.
Curved stainless steel wall cladding formed as a continuous plane, with joint layout set to the curvature of the wall.
Stainless steel wall cladding developed for clean alignment, controlled joints and a continuous architectural plane.
The same water ripple ceiling panel in PVD colour, shifting a cool reflective surface to gold, bronze or project tones.
Ceiling panel in the medium ripple scale, balancing texture, reflection and architectural scale across large interiors.
Stainless steel ceiling panel with a three-dimensional water ripple surface that turns overhead light into moving reflection.
Perforated stainless steel panel made to a project-specific pattern, from geometric repeats to artwork in openings.
Perforated stainless steel screen used as an external shading layer, keeping visual openness while cutting direct light.
Contact Person























