Stainless Steel Roofing Sheets
Stainless steel roofing components for architecture at every scale, from controlled standing seam systems to folded landmark forms and large-span spatial structures.
- Flat, folded and curved panel geometries
- Panel size, joint layout and grain direction set from drawings
- 316L recommended for coastal sites



9 results
ViewShowcase
Curved stainless steel roofing over long spans, formed to radius so the reflection runs continuously across the surface.
Standing seam stainless roofing for long runs, where a repeated raised joint carries stiffness and sets the scale of the roof.
Stainless steel roofing for long spans, planned around continuous eaves, panel repetition and coordinated fabrication.
Flat, folded or curved 304 stainless roofing sheet with a directional brushed finish, produced to the project panel layout.
Reflective stainless steel roof shell formed to a curved roof, letting surrounding light reveal changes in geometry.
PVD coloured stainless steel roof band that carries a metallic tone across a landmark roof or facade.
Folded stainless steel roof panel with expressed joints, built around the geometry of a landmark roof form.
Stainless steel roofing sheet with a three-dimensional water ripple surface, for feature roofs that need changing highlights.
Stainless steel roofing sheet in 316L, the grade we recommend for coastal sites, with panel layout taken from project drawings.
This range is typically specified for commercial and public building roofs. Grade, surface and panel module are fixed from the drawings before production, so the finished work reads as one system rather than a set of separately sourced panels.
- Grade and exposure confirmed against the project location, with 316L recommended for coastal sites
- Panel module, joint layout and grain direction set from the project drawings
- A4 sample approved before production, so the surface is judged under real light



Contact Person









