Metal Canopy & Entrance Cladding
Entrance and canopy systems where the first material impression is made: portal cladding, projecting canopies and curved entrance forms produced as one coordinated set.
- Portal, fascia and soffit as one scope
- Cantilevered and curved geometries
- Joints planned against the opening



9 results
ViewShowcase
Curved canopy in PVD colour with portal cladding to match, giving the entrance a warm continuous tone.
Curved mirror canopy carried into column cladding, so the entrance reflects the approach from every surface.
Curved stainless canopy rolling from facade to soffit, giving the entrance a continuous form.
Cantilevered canopy in PVD colour, giving the projecting plane a warm tone that reads against the sky.
Cantilevered canopy with a mirror soffit that doubles the entrance and lifts the perceived height below.
Cantilevered stainless canopy projecting from the facade, defining the threshold without leading-edge columns.
PVD coloured stainless steel canopy soffit that lifts the underside of an entrance with a warm reflected tone.
Cantilevered stainless steel canopy that projects from the facade to define the threshold without visible support columns.
Flat stainless steel canopy and portal cladding produced as one coordinated entrance element with clean joints.
This range is typically specified for entrance portals, colonnades and drop-off zones. Grade, surface and panel module are fixed from the drawings before production, so the finished work reads as one system rather than a set of separately sourced panels.
- Grade and exposure confirmed against the project location, with 316L recommended for coastal sites
- Panel module, joint layout and grain direction set from the project drawings
- A4 sample approved before production, so the surface is judged under real light



Contact Person







