Experts in high-end stainless steel for architectural aesthetics and spatial art solutions.

Home / All / Interior Metal Systems / Specialized Interior Metal Systems / Bar & Hotel Lobby Metal Cladding

Bar & Hotel Lobby Metal Cladding

Specialized interior metal systems

Bar fronts, hotel lobby feature walls and reception desks in 304 or 316L stainless steel — fluted, etched, embossed or PVD — produced to your panel layout, with the module, joint and grain direction fixed before production starts.

  • Bar fronts and reception backdrops
  • Fluted, PVD and embossed surfaces
  • Hospitality-grade detailing
Fluted bronze stainless steel bar front with a backlit crystal lattice wall in a whisky lounge
At arm's length — fluted bronze bar front, backlit lattice wall
Double-height hotel lobby clad in champagne PVD stainless steel wall panels with an integrated reception desk
Arrival scale — PVD wall panels and reception desk in one scope
Curved fluted stainless steel wall with concealed cove lighting in a completed interior
Installed — curved fluting with concealed cove lighting
  • 25+years of stainless fabrication
  • 58,000 m²manufacturing area
  • 210+experts and craftsmen
  • 60+countries supplied

Stainless Steel Bar Front Cladding & Hotel Lobby Interior Cladding Manufacturer

MetalMagus makes three things a hospitality interior is judged by: the bar front guests stand against, the lobby feature wall they see on arrival, and the reception desk they lean on — the bar front, the lobby metal cladding and the desk. All three are produced in 304 or 316L — 316L where the site is coastal, poolside or chloride-rich — with fluted, etched, embossed or PVD surfaces, and with the panel module, joint layout and grain direction fixed from your drawings before production starts.

The advantage is structural, not rhetorical. Grain, colour, texture and perforation are finished in our own 58,000 m² factory in Hangzhou — seven finish families under one roof, no subcontracted surface work — so the bar front, the lobby wall and the desk come from one batch discipline and read as one material language. Surface colour is held batch to batch at ΔE ≤ 1.0 for plain finishes and ΔE 1.0–1.5 for PVD, measured to ASTM D2244 against the approved sample. A sample is made in 2 days and shipped in 3, so the surface is judged under your actual lighting scheme, and edges and returns are fabricated inside the panel scope so there is no raw edge where a guest's hand lands.

What the specification buys on a hospitality project

  • Product fit

    Bar front, lobby wall and reception desk specified as one package, not three separately sourced panel orders.

  • Material

    304 for inland dry interiors; 316L specified against site exposure rather than assumed.

  • Surface

    Fluted, brushed, hairline, mirror, embossed, etched and perforated — seven families, one factory.

  • Colour

    PVD bronze, gold, champagne and black held to ΔE 1.0–1.5 batch to batch; plain finishes to ΔE ≤ 1.0.

  • Evidence

    Sample made in 2 days, shipped in 3; surface approved under the real lighting before production.

  • Factory

    Since 2001 · 58,000 m² · 210+ craftsmen · 60+ countries supplied · ISO 9001 certified.

Six Parameters That Decide the Specification

  • Grade & exposure

    304 for inland dry interiors; 316L where the site is coastal, poolside or chloride-rich.

  • Surface family

    Brushed, hairline, mirror, fluted, embossed, etched, perforated.

  • Colour

    PVD bronze, gold, champagne and black, held to ΔE 1.0–1.5 batch to batch; plain finishes ΔE ≤ 1.0.

  • Panel module

    Set from project drawings; joint layout and grain direction fixed before production.

  • Edge & return

    Top edge, returns and foot detail produced within the panel scope — no raw edge at contact.

  • Sample & QA

    Sample made in 2 days, shipped in 3; MTC with every batch; surface judged under the real lighting before sign-off.

3 results
ViewShowcase

Where the Three Surfaces Belong

The same material behaves differently at arm's length and at thirty metres. The three product types below are grouped by the condition each one is engineered for, not by finish fashion — together they cover the starting point of most hotel lobby wall cladding briefs.

Bar & cocktail lounge

Stainless Steel Bar Front Cladding

Front counter seen at arm's length and touched all evening.

Surface
Fluted or brushed, directional grain
Grade
304 interior · 316L coastal
Colour
PVD bronze, gold, black
Detail
Returns and top edge in panel scope
View this product

Hotel lobby & arrival

Hotel Lobby Feature Wall Panel

Holds its rhythm at 30 metres and still reads at 1 metre.

Surface
Fluted or slatted for distance
Reading
Arrival scale plus desk-side detail
Colour
One PVD batch across areas
Lighting
Ambient, accent and daylight
View this product

Reception & front desk

Stainless Steel Reception Desk Cladding

The first surface a guest touches, clad in brushed or PVD metal.

Surface
Brushed No.4, hairline or PVD
Wear
Counter skin takes daily cleaning
Pattern
Etched where a mark is required
Tolerance
PVD held to ΔE 1.0–1.5
View this product

What the Hospitality Package Covers

A bar or hotel fit-out rarely needs one panel type. The package is scoped as the metal elements of the room, so one batch, one finish language and one joint discipline carries across everything the guest sees.

  • Bar front & back bar

    Counter face, plinth, toe kick and the surround to back-bar shelving.

  • Reception desk & counter skin

    Desk face, returns, top edge and the joint where the skin meets joinery.

  • Lobby feature wall

    Full-height panels, joint layout and edge trims set to the elevation.

  • Lift lobby & corridor

    Panelling between door sets, with reveals resolved to the frame.

  • Door reveals & portal frames

    Folded pressings and trims that close the opening without a raw edge.

  • Column & pier cladding

    Square, round or curved surrounds, segmented to the radius.

  • Ceiling & soffit

    Panels, baffles and cove returns, detailed for access above.

  • Wine cabinet & display cases

    Cladding to joinery, glass rebates and interior lighting pockets.

  • Bespoke joinery cladding

    Anything on the drawing set that is faced in metal rather than board.

Items outside this list are quoted as bespoke fabrication. Send the drawing and the finish intent; we come back on panel module, fixing method and joint layout.

Specification Table: Bar Front, Lobby Wall, Reception Desk

Grades, finishes and tolerances below are the parameters stated on the product pages. Panel thickness, module and minimum order are confirmed against the project scope rather than assumed from the product type.

ParameterBar front claddingLobby feature wallReception desk cladding
Primary roleFront counter at arm's length, touched all eveningArrival-scale feature surface, read at 30 m and at 1 mDesk face that is leaned on, touched and photographed
Recommended grade304 interior; 316L coastal or spillage304 interior; 316L for high humidity304 interior; 316L coastal sites
Surface that worksFluted, brushed, directional grainFluted or slatted for distance; fine texture close upBrushed or PVD skin; etched where a mark is required
Surface to avoidFlat mirror — shows every smearFine texture alone — disappears at 30 mApplied print — wears at the hand-rest point
Colour systemPVD bronze and gold most specified, ΔE 1.0–1.5PVD carried across reception, lift lobby and barPVD base under etching, ΔE 1.0–1.5
Edge treatmentTop edge and returns in scope, no raw contact edgeReturns detailed into the panel modulePattern set to desk module, lands symmetric each face
Lighting interactionCatches warm low light along rib edgesHandles layered ambient, accent and daylightHighlights the etched relief under accent light
SamplingSample made in 2 days, shipped in 3Sample made in 2 days, shipped in 3Pattern reviewed against desk module first

Surface & Finish Options for Hospitality Interiors

Six finishes cover nearly every hospitality decision, and each one answers a different question: how far away it is seen, how often it is touched, and whether the colour is meant to carry the scheme. A fluted metal wall panel answers the first two; a PVD metal wall panel answers the third — which is why the two are often specified on the same elevation.

  • Fluted / reeded

    Bar fronts, lobby feature walls

    Vertical ribs hold rhythm at 30 m and catch warm bar light along their edges. Marks from hands and glassware fall between the ribs.

    Fluted feature wall
  • Etched

    Reception desks, bar backdrops

    The pattern is a relief cut into the metal, so cleaning, rings and bags do not remove it. Contrast survives the life of the desk.

    Reception desk cladding
  • PVD colour

    Where the scheme is bronze, gold or black

    A bonded metallurgical layer rather than lacquer; batches held to ΔE 1.0–1.5 against the approved sample.

    PVD colour
  • Brushed / hairline

    Large quiet planes, lift lobbies

    Directional grain scatters smudges. No.4 is coarser and more forgiving on big panels; hairline is finer in close view.

    Mechanical finishes
  • Embossed / textured

    Backdrops, feature planes

    Water ripple, hammered and custom embossed turn a flat plane into a surface that changes with the viewing angle.

    Embossed textures
  • Nano anti-fingerprint

    High-touch panels

    A treatment for surfaces people touch, specified per project rather than applied by default.

    Anti-fingerprint

Fluted panels in detail

A fluted panel is a stainless sheet formed into continuous parallel grooves running the length of the panel. The grooves are roll-formed or press-braked into the sheet rather than applied as a coating, so the profile is part of the metal and cannot delaminate. Each panel is specified by two numbers: the flute section, and the module width that repeats across the panel face.

Standard flute sections, quoted as section-and-module pairs
Flute section (width × depth)Module widthTypical use
12 × 12 mm120 mmTight rhythm, bar fronts, joinery returns
12 × 12 mm150 mmReception desks, lift lobbies
37 × 13 mm200 mmWide-flat rhythm, panels behind banquettes
20 × 20 mm300 mmLarge feature walls, double-height lobbies
  • Panel widthup to 1200 mm or 1500 mm, module repeating across the face
  • Panel thickness0.8 mm, 1.0 mm and 1.2 mm nominal
  • Panel length2440 / 3050 / 4000 mm, custom to 6000 mm
  • Grade304; 316L for coastal and higher-corrosion interiors
  • PVDapplied after forming, so the coating covers groove walls and lands
  • Lead timesame as flat sheet — 20 days standard, 7 days fast track

Other sections, depths and module widths are formed to customer drawings; send an elevation or a section detail and we quote against it.

Build-up, backing and fixing

A fluted panel is not a single-sheet product. What the wall performs like depends on three layers: the formed face sheet, the backing that keeps the profile true, and the connection to the substrate. Panels are dry-hung on steel studs or clip-fixed to a flat substrate, with a 2–3 mm expansion gap between adjacent panels — that gap is not a tolerance to be tightened on site, it is what lets the module repeat without the joints closing up.

Section diagram of a fluted stainless panel fixed to steel studs with concealed clips and a 2 to 3 mm expansion gap
Panel to sub-frame: steel studs, concealed fixing, 2–3 mm expansion gap, edge trim.
Layered section comparison of a fluted stainless panel with bare sheet, PVC backing and aluminium honeycomb core
Three build-ups: bare sheet, PVC backing, aluminium honeycomb core.
  • Bare sheetPanels fixed directly to a flat, true substrate; lightest and least expensive.
  • PVC backingEdge protection and a closed back in humid interiors.
  • Aluminium honeycombLarge modules needing flatness over long spans, and panels pre-assembled off site.

Buying Models: Designers, Owners, Contractors, Distributors

Four buyer types specify this range differently, and each one needs a different first document. That is the practical difference between buying from a hotel lobby wall cladding service provider and buying sheet: the first document changes with the buyer.

Buyer typeWhat they needWhat we give
Interior design studios & architectsFinish approval under the real lighting, pattern set to the elevation, one batch across reception, bar and lift lobby.Sample made in 2 days and shipped in 3; pattern reviewed against the desk module; PVD held to ΔE 1.0–1.5 across areas.
Hotel owners & brand technical servicesA surface that survives daily contact and cleaning without reading shabby in year three.Fluted and etched geometry chosen for the touch condition, 316L where the site demands it, spare panels at production.
Fit-out & main contractorsPanels that arrive cut to module, with joint tolerances and edge returns already resolved.Module, joint layout and grain direction set from drawings; returns and foot detail inside the panel scope.
Distributors & import partnersA range that holds colour consistency across repeat hotel projects and ships export-ready.One-batch PVD discipline, export packing with interleaving and elevation labels, documentation per destination market.
Minimum order
50 sheets per order. A single-bar refit is reviewed case by case.
Sample
Made in 2 days, shipped in 3; making free, freight collect.
Lead time
20 days standard, 7 days fast track, confirmed against order quantity.
Price basis
Quoted against the confirmed scope and the day's stainless market. Grade, finish, PVD colour and fabrication depth are what move the figure.
Warranty
Ten (10) years from delivery, against fading beyond 5 Hunter units (ASTM D2244), chalking beyond rating 8 (ASTM D4214), and cracking, checking, peeling or loss of adhesion.
What we need to quote
Elevations or drawings, scope areas, grade and finish intent, destination and programme.

See how we work with partners

Fire Rating, Certificates & Compliance

Solid stainless sheet is non-combustible; the fire performance of the assembly depends on the substrate and core, which is why the build-up is confirmed per project rather than assumed from the product type. Mill certificates, finish records and the documentation required by the destination market are issued with the project package.

ItemPosition
Fire ratingSolid stainless sheet is A1 to GB 8624 and EN 13501-1, and Class A to ASTM E84. The rating of the finished wall is set by the substrate and core in the build-up, confirmed per project against the destination code. Test reports available on request.
PVD and fuel loadPVD is a thin metallurgical layer on steel, not a polymer film. The combustible content of the build comes from the substrate or core, not the surface.
CodesEU, US and AU compliance is assessed per destination and per build; the relevant documentation is quoted with the project.
Mill certificatesAn MTC covering chemical composition and mechanical properties to JIS, ASTM or GB accompanies every batch.
Quality systemISO 9001 certified by WT Assessment, certificate 15/25Q5862R30, valid to 13 July 2028, scope: stainless steel sheet deep processing.
VOC & air qualityMetal and PVD systems are inert; VOC questions apply to the adhesives and sealants used in the assembly.
RecyclabilityStainless is fully recyclable with high recycled content; project-specific sustainability data is supplied with the documentation.

View certificates and compliance documents

Product Knowledge: Finish, Pattern and Contact

Three decisions decide whether a hospitality metal interior works: the finish against the light, the pattern against the viewing distance, and the surface against the contact.

Why a mirror finish fails on a bar front

A bar front is seen at arm length, under warm directional light, and touched all evening. A flat mirror reflects the room and records every smear; a fluted or directional-grain surface scatters those marks. This is why brushed and fluted surfaces dominate bar specifications rather than polish.

Bar front specification

Reading a lobby wall at 3 metres and at 30

A pattern legible at three metres can disappear at thirty. Fluted and slatted surfaces hold their rhythm at arrival scale, while fine textures only pay off close up. The lobby wall has to do both, which is a geometry decision made before the finish is chosen.

Lobby feature wall

Why a brushed skin outlasts a print on a reception desk

A reception desk is touched, leaned on and photographed. A brushed or PVD stainless skin is the metal itself, so cleaning, rings and bags do not wear through it the way an applied print or laminate fails at the hand-rest point. Where the desk needs a house pattern, etching cuts it into the sheet as a relief.

Reception desk cladding

Frequently Asked Questions

What grade of stainless steel should I use for a bar front in a hotel?

304 for interior dry zones; 316L when the bar is coastal, near pools, or subject to frequent spillage and cleaning chemicals.

Do you offer bronze and gold finishes without real brass?

Yes. PVD coatings on stainless give bronze, gold, champagne and black tones with far better wear resistance than lacquered brass.

Will a stainless bar front show fingerprints badly?

Flat mirror shows them worst; textured, brushed and etched surfaces scatter them and read clean for far longer.

Does PVD colour wear off or fade in a busy bar?

PVD is a bonded hard layer, not a lacquer. It resists abrasion at contact points and holds colour under normal hospitality cleaning. Batch colour is held to ΔE 1.0–1.5 against the approved sample.

How much does stainless bar front cladding cost per square metre?

Priced per project: grade, finish, PVD colour and fabrication complexity drive the figure. We quote against a qualified scope rather than publishing a headline rate.

What is the minimum order quantity for a hotel project?

50 sheets per order as standard. A single-bar refit is reviewed case by case rather than refused on the MOQ.

What is the lead time for a hotel lobby feature wall?

20 days standard and 7 days on the fast track, confirmed against the order quantity and the finish. Custom profiles run on the same lead time as flat sheet.

Can I get a sample before ordering?

Yes. A sample is made in 2 days and shipped in 3, with the making free and freight collect, so the surface can be judged under your actual lighting.

How close is the colour match between batches?

ΔE ≤ 1.0 for plain finishes and ΔE 1.0–1.5 for PVD, measured to ASTM D2244 against the approved sample. That is the reason to keep PVD across reception, bar and lift lobby in one batch.

Is stainless steel cladding fire rated and non-combustible?

Solid stainless sheet is A1 to GB 8624 and EN 13501-1, and Class A to ASTM E84. The assembly rating depends on substrate and core and is confirmed per project. Test reports available on request.

For anything else, send the drawing · full FAQ

Request a Bar Front or Hotel Lobby Quote

Send the drawings. We come back on grade, surface, panel module and joint layout — a material and fabrication review of the actual scope, not a catalogue answer.