Stainless Steel Reception Desk Cladding






| Share | |
|---|---|
| Categories | Bar & Hotel Lobby Metal Cladding |
| Brand | MetalMagus Decorative Stainless Steel Manufacturer |
| Product Specifications | MM-304-ET-BR |
| Material | 304 / 316L stainless steel |
| Finish | Brushed, hairline, PVD, etched, fluted or mirror polish |
| Form | Cladding over carcass or formed counter body |
| Detailing | Counter face, plinth and returns in scope |
Most reception counters are a flat skin wrapped round a carcass. This one is a solid stainless steel reception counter with a three-dimensional faceted relief formed into the face, so the polished surface changes as the visitor walks past it rather than sitting still under the lobby lighting. It is the same fabrication discipline as a clad desk, taken one step further: the counter is the product, not a panel applied to joinery.



Reception desk cladding or a formed counter
There are two ways to specify this element. Reception desk cladding skins an existing joinery carcass in brushed, hairline, PVD or etched stainless steel — the fastest route where the desk is already designed. A formed counter is fabricated as a single metal body, which is what allows a sculpted or faceted face, a continuous plinth and a mitred corner with no visible joint.
Surfaces for a reception desk
Brushed No.4 and hairline scatter fingerprints and read quietly at close range, which is why they carry most hotel reception desk specifications. PVD in champagne, bronze or black sets the scheme without lacquer. Etched patterns cut a shallow relief into the sheet where the desk needs a house mark. Mirror polish is the most demanding option: it shows every mark, so it belongs where the counter is a statement piece rather than a work surface.
Formed relief in stainless steel
A faceted or sculpted face is formed into the sheet, not applied over it, so the geometry is part of the counter and cannot peel or delaminate. Facet size, depth and the transition back into the flat face are set on the shop drawing, because the relief has to resolve at the counter's ends and at the hand-rest edge without a raw termination.
Grade, edges and lead time
304 for interior dry zones; 316L where the counter sits near entries, pools or heavy cleaning. Minimum order is 50 sheets per order, with single-counter commissions reviewed case by case. A sample is made in 2 days and shipped in 3, making free and freight collect, so the finish and the relief are judged under the lobby lighting before production. Lead time is 20 days standard and 7 days on the fast track, confirmed against quantity.
- 加载中···
- Name
- Phone
- *Title
- *Content



