316L Stainless Steel Roofing Sheet
| Share | |
|---|---|
| Categories | Standard Roofing Sheets |
| Brand | MetalMagus Decorative Stainless Steel Manufacturer |
| Model | MM-316L-BR-RF |
| Material | 316L stainless steel |
| Surface | Brushed, reflective, PVD or embossed |
| Exposure | Coastal sites per MetalMagus project standard |
| Forming | Flat, folded or curved panels |
| Sample | A4 sample within 3 days |
A stainless steel roofing sheet produced in 316L grade for roofs where atmospheric exposure is the deciding factor. MetalMagus project specification standards recommend 316L for coastal sites, and the panel is formed to the same flat, folded and curved geometries as the 304 range.
Why 316L
Grade selection is driven by where the roof sits, not by a default. For coastal sites the standard specifies 316L, while inland and interior exposures are evaluated per project location. Other grades remain available where a project requires them.
Panel geometry
Panels are formed flat, folded or curved. Panel size, joint layout, repetition and grain direction come from the project drawings so the roof reads as one continuous surface rather than a set of separate components.
Surface options
Brushed, reflective, PVD colour and embossed textures can all be applied to the same panel geometry. Where colour is used, the site-wide colour tolerance standard of average DE below 1.0 applies to the batch.
Fabrication
Bending, rolling, curving and custom forming are followed by cutting, edge detail, welding and assembly preparation. Transition areas between flat, folded and curved zones are resolved at drawing stage.
Sampling and quotation
An A4-size project sample is available within 3 days. Initial quotation response is provided for qualified project inquiries, with MOQ and lead time confirmed against the confirmed project scope.
- 加载中···
- Name
- Phone
- *Title
- *Content
