Can perforated facade panels carry a custom pattern?
Yes. Hole diameter runs 2-10 mm with adjustable pitch, and open area is set between roughly 10% and 60%. The pattern is produced from your artwork and registered to the panel module, so the repeat lines up across joints instead of breaking at every panel edge.
Open area decides the effect
40% and above reads as daylight and airflow. 20-30% reads as a semi-transparent screen: you see light and movement, not detail. Below 20% the surface reads mostly solid, with the pattern carried by shadow.
What to send with the enquiry
A vector pattern, the intended open area, the panel module and the viewing distance. Those four inputs decide hole size, pitch and whether the pattern can be produced by punching or needs laser cutting.
| Parameter | Range |
|---|---|
| Hole diameter | 2-10 mm |
| Pitch | Adjustable |
| Open area | 10-60% |
| Grade | 304 or 316L by exposure |
Are you looking for a reliable manufacturer？
We can quickly provide customers with market analysis, technical support and customized services.Contact Person
